top of page

Automatic Window Opening System In A 8 Meter Height Factory

Updated: May 20, 2022

automatic windows in a high ceiling factory
automatic windows in a high ceiling factory

Automatic Windows In A High Ceiling Factory

Some areas of this factory were equipped with overhead cranes. The windows are also on a very high level. These windows are a part of the smoke vent system. In the workday, people can open these windows for the natural vent. Furthermore, the high and large windows are also providing abundant sunlight for interior space.

The spacious lower space is for machine tools. When it is put into production, the working environment is hot for workers. Therefore, the architect put as many windows as possible to improve the natural vent.

Window Systems Based On Linear Actuators

Automatic window systems_factory_1
Automatic window systems_factory_1

The system was based on KST-A01 Linear Actuators. The actuators are built-in 24 VDC input motors. They should connect together and operate by KST-B1 Actuator Controllers. Therefore, people can control all windows in the same zone.

Please refer to the above picture. The top windows and bottom windows are controlling by different controllers. People can operate the windows according to the temperature or weather. When it is fully open, the opening range is about 60 to 70 degrees.

Maintenance Notifications Of The Automatic Window Opening Systems

For extending the lifespan of the window frames and mechanism, there are few notes for you:

  1. The maximum dimension of each window is about 1 meter by 1 meter.

  2. Ensure that there will be no obstacles on the windows and around the windows.

  3. Please do close the windows when it is raining. And the linear actuators should avoid installing near the humid area.


Basic Information About The Case Of Automatic Windows In a Hydraulic Cylinder Factory

©Soon Industrial Co., Ltd. All right reserved


Recent Posts

See All


bottom of page